Ecor Pro DH3511 45 Litre Commercial Dehumidifier

Ecor Pro DH3511 45 Litre Commercial Dehumidifier

Quick Find Code: DH3511

2 Year Warranty
Free Delivery on orders over £30
  • Galvanised Steel / Yellow Epoxy Paint
  • Extraction Rate Liters 45 Per Day (Equivalent to 90 Liters /D)
  • Vents Moisture 80mm Pipe
  • Dessicant -20°C - +35°C
  • Power Standby / Working (W) 2 / 1500

£0.00 (inc. VAT)

Show ex. VAT

Buy more, save more!

QuantityPrice (inc. VAT)Saving Per Item
3+£0.00Save 2%
6+£0.00Save 3%

Product Overview

110V 45 Litre DH3511 Desiccant Industrial Dehumidifier (Equivalent to a 90 litre compressor dehumidifier)
Industrial dehumidifier DH3511 steel construction with tough epoxy paint finish. Used for:- Fresh water boats / Industrial Processes / Garages./ Hire Industry / Out Buildings / Flood Areas Very small for its 45 litre capacity. Will dry 247 and dry even down to -20°C. Can work up to 35°C. Perfect for any climate.
Steel Inside & Out Tough Enough Even for Hiring 110V
Can be carried by one person and transported easily with the carrying handle. No water container to empty. Instead the water is expelled via a 80mm air duct to the outside (standard size). Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively
Ecor Pro’s Unique DH3511 Low Temperature (+35 to -20°C)
Designed in the UK as a unit fit for industrial drying. The DH3500 Ecor Pro 4 Hole desiccant dehumidifier and was even built for use in the hire industry. Many configurations if installed. Input process air is dust filtered & dried. Input air can be ducted in with a 125mm duct (5″ inches). Wet exhaust air can be ducted out via a 80mm duct

Used in Sealed Storage Units In Museums, Banks, Military Applications, Offices & Server Rooms etc
Ecor Pro’s research shows that the DH3511 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Highly Compact - Perhaps the smallest 45 Litre dehumidifier in the market. Dust Filter - The DH3511 desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair - Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the DH3511 dehumidifier. Cord sets can be replaced in around 20 minutes
On Four Feet - Anti scratch plastic feet
Carrying Handle - Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the industrial dehumidifier duct flanges if in transit.
Humidistat Connection - The DH3511 has no humidistat but one can be added very simply. A military standard connector is on the front of the DH3511. To this the remote humidistat EPHUM220 can be screwed in place to switch on / off the dehumidifier at the humidity you set.

Duct Air-In & Out - The DH3511 has all ducts fitted with flanges to allow ducting to be added with 125mm hard or flexible ducting.
Regen Air- In & Out - The DH3511 has a second fan compared to the DH2511 which has only one. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by "Regen" air. This air can be drawn from outside the room being dried. Both wet air-out and the regen air-in can be ducted away with 80mm ducting either hard or flexible.
"Four Hole System" - The system is classed as a "four hole" system due to the two inlets and two outlets. The advantage of a four hole system is that places can be dried pressure neutrally. The DH3511 can there for be used to dry large fridge freezer for instance. Power Supply - 110V supply 50Hz

Auto Reset - If there is an interruption to the power supply, the DH3511 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a "dirty" power supply that can affect other electronically controlled products.
All Metal Construction - Mild steel metal construction covered in corrosion resistant epoxy paint backed on for added paint strength inside & outside. Designed for longevity.
2 Meter Power Cord - no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Specification

Applicable AreaBoat, Commercial Premises, Garage, Home
Fan Speeds1
Filter TypeReticulated Foam
Finish Or ColourYellow Black Epoxy Paint
LouvreNo
MaterialStainless Steel
Noise Level52 Db
Operating Temperature Maximum40 CELSIUS
Operating Temperature Minimum-20 CELSIUS
Remote ControlYes (Not Supplied)
tank sizeNone - Pump Only
Type Of DehumidifierDesiccant
Voltage110 v
Wall MountableYes
Depth560 mm
Height345 mm
Weight19.5 KG
Width352 mm

No FAQs found. If you have a specific question about a product, please get in touch.

Free UK Next Working Day Delivery applies to thousands of qualifying products

Free UK Next Working Day Delivery on All Qualifying Orders Over £30. Orders under £30 will incur a £3.95 Delivery Fee.

This Excludes Delivery to the Scottish Highlands, Offshore Islands and Northern Ireland. These will be charged at an extra rate, which will be calculated at the checkout.

Heavier Items may also incur an extra fee.

Please note all orders placed over a weekend or Bank Holiday will be dispatched the following working day.

Price Match Promise

Here at Ledbulbs.co.uk we offer so much more than the best prices. Not only will you find our products at competitive prices but you can guarantee that what we offer will be of the highest quality. If you find a product you’re interested in at a cheaper price, we’ll match it! All you need to do is get in touch with our team by filling in the form below, provide a link to where you found the product cheaper and we will get back to you within three working hours!

You may also like…

Ecor Pro Humidistat for DH2500 & DH3500 - EPHUM220

Ecor Pro Humidistat for DH2500 & DH3500 - EPHUM220

£108.95 (inc. VAT)

Ecor Pro 125mm X 3m Air Duct Accessory - EPDUCT125x3

Ecor Pro 125mm X 3m Air Duct Accessory - EPDUCT125x3

£72.95 (inc. VAT)

Ecor Pro 125mm x 6m Air Duct Accessory - EPDUCT125x6

Ecor Pro 125mm x 6m Air Duct Accessory - EPDUCT125x6

£78.95 (inc. VAT)

Ecor Pro 85mm x 3m Air Duct Accessory - EPDUCT85x3

Ecor Pro 85mm x 3m Air Duct Accessory - EPDUCT85x3

£72.95 (inc. VAT)