Tap to zoom Tap to exit zoom SALE

Ecor Pro DH2500 INOX - Desiccant Industrial Dehumidifier 35 Litres

Quick Find Code: DH2500-Inox

2 Year Warranty
Free Delivery on orders over £50 (excluding Highlands and Islands)
  • Stainless Steel
  • Extraction Rate Liters 35 Per Day (Equivalent to 70 Liters /D)
  • Vents Moisture 80mm Pipe
  • Dessicant -20°C - +35°C
  • Power Standby / Working (W) 2 / 900

Ecor Pro DH2500 INOX - Desiccant Industrial Dehumidifier 35 Litres

Quick Find Code: DH2500-Inox

2 Year Warranty
Free Delivery on orders over £50 (excluding Highlands and Islands)
  • Stainless Steel
  • Extraction Rate Liters 35 Per Day (Equivalent to 70 Liters /D)
  • Vents Moisture 80mm Pipe
  • Dessicant -20°C - +35°C
  • Power Standby / Working (W) 2 / 900

£1,998.95
£1,949.95 (inc. VAT)

Show ex. VAT

PayPal Pay In Three

Pay in 3 interest-free installments of £649.98

Buy more, save more!

QuantityPrice (inc. VAT)Saving Per Item
10+£1,910.96Save 2%
20+£1,871.96Save 4%
30+£1,832.96Save 6%

Product Overview

35 Litre Desiccant Industrial Dehumidifier DH2500 Inox (Equivalent to a 70 litre compressor dehumidifier)

Industrial Dehumidifier DH2500 INOX Stainless Steel. Used for:- Boats & Ships / Food Preparation / Freezers / Cold Rooms / Hospitals / Industrial Processes / Garages / Flood Drying
Very small for its 35 litre capacity. Will dry 247 and dry in temperatures even down to -20°C. Can work up to 35°C. Perfect for any climate. Chemical & salt resistant for cleaning and anti corrosion.
Stainless Steel Inside & Out Perfect On Ships or for Food Industry
Can be carried by one person and transported easily with the carrying handle. No water container to empty. Instead the water is expelled via a 80mm air duct to the outside (standard size). Self regulating energy usage that adapts to air pressure differences using always the right amount of power to dry effectively
Ecor Pro’s Unique DH2500 Low Temperature (+40 to -20°C)
Designed in the UK as a unit fit for professional purpose. The DH2500 Ecor Pro is a 3 Hole desiccant dehumidifier and was even built for use in the hire industry. Many configurations if installed. Input process air is dust filtered & dried. Input air can be ducted in with a 125mm duct (5″ inches). Wet exhaust air can be ducted out via a 80mm duct
Ecor Pro’s research shows that the DH2500 will be four to seven times faster at drying buildings at low temperatures than a traditional compressor dehumidifiers

Highly Compact - Perhaps the smallest 45 Litre dehumidifier in the market.
Dust Filter - The DH2500 desiccant industrial dehumidifier benefits from a simple reticulated dust filter in metal frame that can be shaken clean or easily replaced to prevent dust particles entering the unit and impeding performance.
Easy Repair - Maintenance and eventual repair have been thought through with an easy to remove cover that gives easy access to replace cord sets or warn parts by a qualified persons quickly. Prolonging the lifetime of the DH2500 dehumidifier. Cord sets can be replaced in around 20 minutes On Four Feet - Anti scratch plastic feet
Carrying Handle - Easy to carry by one person. The handle can be removed if the product is being installed. The handles also protect the dehumidifier duct flanges if in transit.
Humidistat Connection - The DH2500 has no humidistat but one can be added very simply. A military standard connector is on the front of the DH2500. To this the remote humidistat EPHUM220 can be screwed in place to switch on / off the dehumidifier at the humidity you set.

Duct Air-In & Out - The DH2500 has all ducts fitted with flanges to allow ducting to be added with 125mm hard or flexible ducting. Wet Air Exhaust - The DH2500 has one internal fan compared to two in the DH3500. Both do not produce water. The moisture is vented away allowing it to work in colder temperatures. The moisture is purged from the system by 15% of the process air so will dry with slight negative pressure. "Three Hole System" - The system is classed as a "three hole" system due to the one inlet and two outlets. With slight duct configuration the hole system can be used as a four hole industrial dehumidifier but needs accurate duct flow measurement. If this is a concern then the DH3500 is an easier alternative

Power Supply - 220V supply 50Hz
Auto Reset - If there is an interruption to the power supply, the DH2500 will continue to operate as soon as the power has been returned. Perfect in locations where the there is a "dirty" power supply that can affect other electronically controlled products.
All Metal Construction - Stainless steel metal construction inside & outside. Designed for longevity.
2 Meter Power Cord - no need to join cables when placed for instance in crawl spaces or lofts in the home for example.

Specification

Applicable AreaGarage, Warehouse
Filter TypeReticulated Foam
Finish Or ColourStainless Steel
IP RatingIPX1
MaterialGalvanised Steel Epoxy Coated
MountingWall
MPNDH2500-Inox
Noise Level Maximum52dB
Old GTIN5060224951071
power consumption900W
Remote ControlYes (Sold Separately)
Type Of DehumidifierDesiccant
Voltage220V
Wattage900W
Depth445mm
Height345mm
Weight17.5kg
Width352mm

Free UK Next Working Day Delivery applies to thousands of qualifying products

Free UK Next Working Day Delivery on All Qualifying Orders Over £50. Orders under £50 will incur a £5.90 Delivery Fee.

This Excludes Delivery to the Scottish Highlands, Offshore Islands and Northern Ireland. These will be charged at an extra rate, which will be calculated at the checkout.

Heavier Items may also incur an extra fee.

Frequently Asked Questions

No FAQs found. If you have a specific question about a product, please get in touch.