Blauberg Turbo 200mm (8") In-line Mixed Flow Extractor Fan with Timer - TURBO-200-T

Product Overview

This inline mixed-flow fan supports a 200 mm (8″) duct connection and delivers airflow up to approximately 1,080 m³/h at maximum speed, with a lower bound around 805 m³/h. By combining axial and centrifugal impeller design (“mixed flow”), it offers good pressure development for duct runs while maintaining strong volume throughput.

The „-T” variant includes a run-on timer adjustable from roughly 2 to 30 minutes, meaning the fan can continue extracting air for a set time after the trigger (e.g., light switch or humidistat) is turned off. The casing is made of low-flammability polypropylene, and the motor is a two-speed German ball-bearing AC unit with built-in thermal protection, for durability and reliability.

This model is rated IPX4, making it suitable for humid or wet-room environments such as bathrooms, kitchens or commercial wash-down areas. The fan can be installed in any orientation (inline, ceiling, wall) and features removable motor/impeller units for easier maintenance without dismantling the duct. It is designed for 230 V single-phase supply (50/60 Hz). 

Downloads

Download turbo-t-data-sheet

Specification

Battery Backup	Yes
Current	AC
Current Amps	0.5 A
Domestic or Commercial	Domestic, Commercial
Duct Size Diameter	200 mm
Extractor Type	Axial
Frequency	60 Hz
IP Rating	IPX4
Maximum Airflow	1080 m³/h
Minimum Airflow	805 m³/h
Mounting	Wall, Ceiling
Noise Level Maximum	45 dB
Noise Level Minimum	39 dB
power consumption	108 W
Timer	Yes
Voltage	230 V
Wattage	108 W
Depth	199 mm
Height	261 mm
Length	296 mm
Weight	3.8 kg
Width	239 mm