Manrose 230mm (9") Wall/Window Extractor Fan with Pullcord & Internal Shutters, Manual - WF230MP

Product Overview

The WF230MP is designed for wall or window mounting in commercial or larger-domestic settings, offering a substantial extract rate of approximately 668 m³/h (≈ 185 litres/second). Its 230 mm diameter and axial fan design make it suitable for demanding environments such as offices, shops, restaurants, utility zones and more.

What sets the WF230MP apart is the manual pull-cord operated internal back-draught shutters, which also serve to start the fan when pulled. These internal shutters are built into the housing behind the grille, helping prevent unwanted ingress of draughts when the fan is off and maintaining a clean visual finish.

On the technical and installation side, the fan operates on a typical 220-240 V AC supply, uses a robust motor with pre-oiled bearings for long life, consumes around 41 W, and is rated for standard ambient conditions up to 40 °C. The unit is designed for installation through a standard ~260 mm hole and must be mounted out of reach of bath/shower users and at least 1.8 m above the floor. 

Specification